Re-recording a picture in the middle of a recorded tape
You can insert a scene in the middle of a recorded tape by setting the starting and ending points. The previous recorded portion will be erased. If the RC time code appears in the viewfinder, set COUNTER to NORMAL in the menu system to display the tape counter.
(1) While the camcorder is in Standby mode, keep pressing the + (forward playback) or – (reverse playback) side of EDITSEARCH, and release the button where you want to end the insertion [b]. The camcorder enters Standby mode again.
(2) Press COUNTER RESET. The counter resets to zero.
(3) Keep pressing the – side of EDITSEARCH and release the button at the point where you want to start the insertion [a].
(4) Press ZERO MEM on the Remote Commander. The ZERO MEM indicator flashes.
(5) Press START/STOP to start recording. The recording stops automatically at the counter zero point.
[a] |
|
| [b] | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advanced operations
1
EDITSEARCH Î
2 COUNTER RESET
STBY
0:00:00
4 ZERO MEM
3 | EDITSEARCH Î | |
| 5 LO | K |
| C | |
| S |
|
| T | Y |
| A | |
|
| N DB |
STBY |
| STBY |
| ||
ZERO MEM |
| ZERO MEM |
To change the end point
Press ZERO MEM to erase the ZERO MEM indicator, then repeat steps 2 to 5.
Note on
The picture and the sound may be distorted at the end of the inserted portion when it is played back.
33
