Recording from a VCR or TV
You can record a tape from another VCR or TV program from a TV that has audio/ video outputs. Connect the camcorder to the VCR or TV.
(1) While pressing the small green button on the POWER switch, set it to VTR.
(2) Press rREC and the button on far right together at the point where you want to start recording.
In recording and recording pause mode, S VIDEO and VIDEO/AUDIO jacks automatically work as input jacks.
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)
[a]to obtain high quality picture.
1 | POWER |
|
|
| 2 REC |
CAMERA |
|
|
| ||
| OFF |
|
|
|
|
| VTR |
|
|
|
|
| [a] |
|
|
| TV |
|
|
|
| (not supplied) | |
| S |
|
|
| |
| - |
|
|
| |
|
| V |
|
| |
|
| I |
| ||
|
|
| D |
| |
|
|
|
| E | VCR |
| [b] |
|
| O | |
| V |
|
|
| |
|
|
|
|
| |
|
| I |
| VIDEO OUT | |
|
| D | E | ||
|
|
|
| O |
|
| AUDIO |
|
|
| AUDIO OUT |
|
|
|
|
| |
:Signal flow
If your VCR or TV is a monaural type, connect only the white plug for audio on both the camcorder and the VCR or TV.
If you are going to connect the camcorder using the S video cable (not supplied) [a], you do not need to connect the yellow (video) plug of the A/V connecting cable [b].
Do not connect the S video cable to the camcorder if your VCR or TV doesn’t have any S video jack.
To check the picture from a VCR or TV before recording
Press Pafter pressing rREC. You can check the picture in the viewfinder.
To stop recording
Press ¹.
Advanced Operations
69
