Making your own original titles
You can make up to two titles and store them in the camcorder.
Eject the cassette before you begin. Your title can have up to 22 letters.
(1) (2) (3) (4) (5)
(6)
While in Standby mode, press MENU to display the menu.
Turn the control dial to select TITLE 1 SET or TITLE 2 SET, then press the dial. Turn the control dial to highlight a letter, and press the control dial to select it. Repeat step 3 until you finish the title.
When you are finished, turn the control dial to highlight S and press the control dial to select it.
The title is stored.
Press MENU to erase the menu display.
1 MENU | 2 |
MENU
COUNTER ORC TO SET TITLE COL TITLE POS TITLE LANG
TITLE1 SET – – – – –
TITLE2 SET
[MENU] : END
MENU
L
M TITLE1 SET N O P
[MENU] : END
– – – – – – –
3
MENU
C
D TITLE1 SET N E F G
[MENU] : END
– – – – – –
5
MENU
–
.
TITLE1 SET NEW YORK S>
A
[MENU] : END
To edit a title you have stored
In step 2, select TITLE 1 SET or TITLE 2 SET, whichever title you want to edit is stored in. Then change the title.
Instead of selecting
S
in step 5 to store the title
You can do one of the following:
•Enter 22 letters.
•Press MENU.
If you do nothing more than 5 minutes
The power goes off automatically. Turn STANDBY down once, turn it again up and proceed from step 3.
To delete a title
At the leftmost character position, select S selecting empty spaces. If you do so, a title
and press TITLE. Do not erase the title by full of empty spaces is stored.
40
