Sony CCD-TR3400 Editing onto another tape, Writing the RC Time code on a recorded tape, Indicator

Writing the RC Time code on a recorded tape

Note on --	:--:--:-- indicator
The --:--:--:--	indicator appears during playback if:

•nothing is recorded.

•the RC time code is unreadable because of the damage of the tape or because of the noise.

•you recorded using another VCR without RC time code function.

•you erase the index signal or make PCM after recording on another VCR in the portion on which the RC time code is written.

In this case, we recommend you to rewrite the RC time code.

Editing onto another tape

You can create your own video program by editing with any other h8 mm, HHi8,

jVHS, kS-VHS, ðVHSC, KS-VHSC, lBetamax or ÂED Betamax VCR that has video/audio inputs.

Advanced Operations

Before editing

Connect the camcorder to the VCR as described in “Connections for playback” on page 15.

Set the input selector on the VCR to LINE, if available.

(1) While pressing the small green button on the POWER switch, set it to VTR.

(2) Set EDIT to ON in the menu system.

1 POWER CAMERA

OFF

VTR

2 1 MENU 2	3	MENU
		EDITOFF
		ON

[MENU] : END

: Signal flow

67

CCD-TR3400 3-859-084-22(1)