Creating a program
— CD Program Memory
You can play the tracks in the order you want by making your own program. You can select up to 24 tracks for a program. You can store the programs in memory.
1 During CD playback, press (SHIFT), then press (4) (PLAY MODE) for two seconds.
TRACK
RLAY MODE | ENTER |
2 Push the SEEK/AMS control up or down to select the track you want.
3 Press (6) (ENTER) momentarily.
RLAY MODE | ENTER |
| µ |
| TRACK |
RLAY MODE | ENTER |
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(4)(PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is reading the data.
•“*Mem Full*” appears in the display when you try to enter more than 24 tracks into a program.
Playing the stored program
1
2 Press (4) (PLAY MODE) repeatedly until “PGM” appears.
3 Press (5) (n) repeatedly until “PGM on” appears.
PGM
RLAY MODE
Program Play starts.
4 Press (SHIFT).
To return to normal playback mode, select “PGM off” in step 3 above.
Note
“Not ready” appears in the display if no track is stored in the program.
Erasing an entire program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
RLAY MODE | ENTER |
2 Press (2) (N) repeatedly until “DEL” appears.
RLAY MODE | ENTER |
To delete Program 2, press (5) (n) repeatedly until “PGM 2” appears.
3 Press (6) (ENTER) for two seconds.
RLAY MODE | ENTER |
The entire program is erased.
4 When you finish erasing programs, press
(4)(PLAY MODE) for two seconds.
5 Press (SHIFT).
10