Press (SHIFT).
Changing the sound and display settings

The following items can be set: •Clock (page 7).

•D.Info (Dual Information)*1 – to display the clock and the play mode simultaneously (on) or to display the information alternately (off).

•Amber/Green – to change the illumination color to amber or green.

•Dimmer to – change the brightness of the display.

Select “Auto” to dim the display only when you turn the interior lights on.

Select “on” to dim the display.

Select “off” to deactivate Dimmer. •Contrast – to adjust the contrast if the

indications in the display are not recognizable because of the unit‘s installed position.

•Voice guide*1 function for vocalized comments.

Select “Voice 1” to minimize the volume of the guide.

Select “Voice 2” to be louder the volume than “Voice 1.”

Select “Voice 3” to maximize the volume of the guide.

Select “Voice off” to deactivate Voice guide.

•Beep – to turn the beep sounds on or off. •RM (Rotary Commander) – to change the operative direction of the controls of the

rotary commander.

Select “norm” to use the rotary commander in the factory-set position.

Select “rev” when you mount the rotary commander on the right-hand side of the steering column.

•L.out (Line output)*2 (page 18).

•Loud (Loudness)*1 – to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

•LPF (Low Pass Filter)*1.

•M.dspl (Motion Display) – to turn the motion display to 1, 2, or off.

•English/French*1 – to change the vocalized comments of the voice guide to English or French.

•A.Scrl (Auto Scroll)*1 (page 9, 19).

1

2 Press (3) (SET UP) repeatedly until the desired item appears.

Each time you press (3) (SET UP), the item changes as follows:

Clock nD.Info*1 nAmber/Green nDimmer

nContrast nVoice*1 nBeep nRM n

L.out*2 nLoud*1 nLPF*1 nM.dspl n

English/French*1 nA.Scrl*1

*1 When the radio is off, or when no CD, or MD is playing this item will not appear.

*2 When the optional equalizer preamplifier is not connected, this item will not appear.

3 Press (5) (n) to select the desired setting (Example: on or off).

For the “Contrast” setting, pressing (5) (n) makes the contrast higher, and pressing (2) (N) makes the contrast lower.

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

17