Creating a program
—Program Memory (For a CD/MD unit with the program memory function)
You can play tracks in the order you want by creating and storing programs in the unit‘s memory. You can select up to 24 tracks for a program. You can store the programs in memory.
1 During CD playback, press (SHIFT), then press (4) (PLAY MODE) for two seconds.
Program edit mode
DISCTRACK
RLAY MODE | ENTER |
If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P” above.
2 Select the track you want.
1Press (SOURCE) repeatedly to select
CD or MD.
2Press (MODE) repeatedly to select the unit.
3Press (SHIFT), then press the number button to select the disc.
4Press (SHIFT).
5Push the SEEK/AMS control up or down to select the track.
3 Press (6) (ENTER).
RLAY MODE | ENTER |
| µ |
DISC | TRACK |
RLAY MODE | ENTER |
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish entering tracks, press
(4)(PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is reading the data, or when a disc has not been put into the unit.
•“*Mem Full*” appears in the display when you try to enter more than 24 tracks into a program.
Playing the stored program
Changing the disc order in the unit will not affect program memory play.
1 Press (SHIFT).
2 Press (4) (PLAY MODE) repeatedly until “PGM” appears.
3 Press (5) (n) repeatedly until “PGM on” appears.
PGM
RLAY MODE
Program Play starts.
4 Press (SHIFT).
To return to normal playback mode, select “PGM off” in step 3 above.
Notes
•If you press a number button during program memory play, program memory play is interrupted, and playback of the selected disc starts.
•“NO Data” appears in the display if no track is stored in the program.
•If a track stored in the program memory is not in the disc magazine, the track will be skipped.
•When the disc magazine contains no tracks stored in the program memory, or when the program information has not been loaded yet, “Not ready” appears.
21