Radio
Memorizing stations automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2, and AM).
Caution
When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
1 Press (SOURCE) repeatedly to select the tuner.
Each time you press (SOURCE), the source changes as follows:
z TUNER |
| z CD |
| z MD* |
|
| |||
|
|
| ||
|
|
|
|
|
*If the corresponding optional equipment is not connected, this item will not appears.
2 Press (MODE) repeatedly to select the band.
Each time you press (MODE), the band changes as follows:
z FM1 | z FM2 | z AM |
3 Press (SHIFT), then press (4) (PLAY
MODE) repeatedly until “B.T.M” appears.
4 Press (5) (n).
The unit stores stations in the order of their frequencies on the number buttons.
A beep sounds when the setting is stored.
5 Press (SHIFT).
Notes
•The unit does not store stations with weak signals. If only a few stations are received, some number buttons will retain their former setting.
•When a number is already indicated in the display, the unit stores stations in order from the one currently displayed.
Memorizing only the desired stations
You can preset up to 30 stations (10 each for FM1, FM2, and AM) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Push the SEEK/AMS control up or down to tune in the station that you want to store on the number button.
4 Press and hold the desired number button ((1) to (10)) until “MEM” appears.
The number button indication appears in the display.
Note
If you store a new station on a number button which already has a station registered, the previously stored station will be replaced by the new one.
12