Adding tracks to a program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
RLAY MODE | ENTER |
To select Program 2, press (5) (n) repeatedly until “P” appears.
2 Press (2) (N) or (5) (n) to select the track slot number where you want to insert a track.
Track slot number
TRACK
RLAY MODE | ENTER |
3 Push the SEEK/AMS control up or down to select the track you want to insert.
4 Press (6) (ENTER) momentarily to enter the track.
The current track in that slot number and the succeeding tracks shift down.
5 To continue inserting tracks, repeat steps
2 through 4.
Note
When a 24 slots have been filled, “*Mem Full*” appears in the display, and you cannot insert tracks.
6 When you finish inserting tracks, press
(4)(PLAY MODE) for two seconds.
7 Press (SHIFT).
Erasing tracks in a program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
RLAY MODE | ENTER |
2 Press (2) (N) or (5) (n) to select the track you want to erase.
Track slot number
TRACK
RLAY MODE | ENTER |
The track currently registered in slot 6.
3 Press (6) (ENTER) for two seconds.
When you erase a track from a slot number, the succeeding tracks shift up to fill the gap.
DISC | TRACK |
RLAY MODE | ENTER |
| µ |
| TRACK |
RLAY MODE | ENTER |
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6 Press (SHIFT).
11