Other Functions

You can also control an optional CD or MD unit, or equalizer preamplifier with the rotary commander.

Labelling the rotary commander

Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below.

SOUND

LIST

MODE

MODE

LIST

SOUND

Using the rotary commander

By pressing buttons

(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER nCD nMD* nTV*

*If the corresponding optional equipment is not connected, this item will not appears.

Pressing (MODE) changes the operation in the following ways;

•Tuner: FM1 nFM2 nAM

•CD unit: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

•TV/Video: TV nVideo1 nVideo2 n…

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

By rotating the control (the SEEK/AMS control)

Rotate the control and release it to: •Locate a specific track on a disc. Rotate

and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to tune in a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to: •Receive the stations memorized on the

number buttons. •Change the disc.

15