Erasing an entire program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISCTRACK
RLAY MODE | ENTER |
If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P” above.
2 Press (2) (N) repeatedly until “DEL” appears.
RLAY MODE | ENTER |
3 Press (6) (ENTER) for two seconds.
RLAY MODE | ENTER |
The entire program is erased.
4 When you finish erasing programs, press
(4)(PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISCTRACK
RLAY MODE | ENTER |
If you have labelled the disc, the bank edit mode appears. Press (4) (PLAY MODE) to display “P” above.
2 Press (2) (N) or (5) (n) to select the track slot number where you want to insert a track.
Track slot number
DISCTRACK
RLAY MODE | ENTER |
3 Push the SEEK/AMS control up or down to select the track you want to insert.
4 Press (6) (ENTER) to enter the track. The current track is inserted in that slot number and the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2 through 4.
Note
When a 24 slots have been filled, “*Mem Full*” appears in the display, and you cannot insert more tracks.
5 When you finish inserting tracks, press
(4)(PLAY MODE) for two seconds.
6 Press (SHIFT).
22