1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (10)) where the desired station is stored.
If you cannot tune in a preset station
Push and release the SEEK/AMS control up or down to search for the station (automatic tuning).
Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Local” (local seek mode) is displayed. Then press (5) (n) to select “Local on.” Press (SHIFT). Only the stations with relatively strong signals will be tuned in.
Tip
If you know the frequency of the station you want to listen to, push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
1 During radio reception, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Mono” appears.
2 Press (5) (n) repeatedly until “Mono on“ appears.
The sound improves, but becomes monaural (“ST” disappears).
3 Press (SHIFT).
To return to normal mode, select “Mono off” in step 2 above.
If interference occurs during FM reception
If there is interference from neighboring stations, follow the steps below and select “Narrow”. If interference is not a problem, select “Wide” to maximize signal reception and improve sound quality or “IF Auto ”to switch between “Narrow” and “Wide” automatically.
1 Press (SHIFT) during FM reception.
2 Press (4) (PLAY MODE) repeatedly until “IF Auto“ appears.
3 Press (5) (n) repeatedly to select desired setting.
z IF Auto |
| z Wide |
|
Narrow Z
4 Press (SHIFT).
Changing the display item
Each time you press (DSPL), the item changes as follows:
| z Station name* |
|
| z Frequency |
|
|
|
|
|
|
| ||
|
|
| Clock Z |
| ||
|
|
|
| |||
*If the station name is not stored, “NO Name” appears in the display for one second.
After if you select the desired item, the display will be automatically change to the Motion Display mode after a few seconds.
In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 17).
13