Adjusting the frequency of the subwoofer(s)

To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s). By setting the cut-off frequency, the subwoofer(s) will output only low frequency signals so you can get a clearer sound image.

1 Press (SOURCE) to select a source (radio,

CD or MD).

2 Press (SHIFT), then press (3) (SET UP) repeatedly until “LPF” appears.

3 Press (5) (n) or (2) (N) repeatedly to select desired setting.

SET UP

Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows:

LPF off ÷LPF 80 Hz ÷LPF 120 Hz

4 Press (SHIFT).

When the frequency setting is complete, the display returns to the normal playback mode.

Adjusting the sound and frequency of the equalizer

This unit can also control an optional equalizer preamplifier.

This lets you add some effects to the sound field of the currently selected source.

For details, refer to the instructions manual supplied with the equalizer preamplifier.

Note

If you connect the optional digital preamplifier XDP-210EQ, the voice guide function will not work.

Changing the line output level

You can change the line output level if you hear distortion or other noise.

When the optional equalizer preamplifier is connected, you can set this function.

1 Press (SHIFT), then press (3) (SET UP) until “L.out” appears.

2 Press (5) (n) to select the desired

setting “L.out Hi” or “L.out Lo.”

3 Press (SHIFT).

18