— Station Memo
You can assign a name to each radio station and store it in memory. The name of the current station appears in the display. You can store up to eight characters for each station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (LIST) for two seconds.
3 Enter the characters.
1Rotate the dial clockwise to select the
desired characters.
(A nB nC n··· Z n0 n1 n2 n
··· 9 n+ n– n* n/ n\ n> n< n. n_ )
If you rotate the dial counterclockwise, the characters appear in the reverse order.
If you want to put a blank space between characters, select “_” (under- bar).
2Press (5) (n) after locating the desired character.
The flashing cursor moves to the next space.
If you press (2) (N), the flashing cursor moves to the left.
3Repeat steps 1 and 2 to enter the entire name.
4 To return to normal radio reception, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_”
14
Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item changes as follows:
z Station name* | z Frequency |
Clock Z
*If the station name is not stored, “NO Name” appears in the display for one second.
Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
The station name appears in the display.
3 Rotate the dial to select the name you want to erase.
4 Press (6) (ENTER) for two seconds. The name is erased.
Repeat steps 3 and 4 if you want to erase other names.
5 Press (LIST) for two seconds.
The unit returns to normal radio reception mode.
Locating a station byname —
1 Press (LIST).
The name assigned to the current station appears in the display.
2 Press (LIST) repeatedly until you find the desired station.
3 Press (6) (ENTER) to tune in the desired station.
Note
After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. To turn off the display, press (DSPL).