Hookups and Settings

Overview

Complete the following steps to start using this DVD recorder home theatre system.

Step 1: Unpacking (page 12)

m

Step 2: Connecting the Speaker System (page 14)

m

Step 3: Connecting the FM/AM Aerials (page 21)

m

Step 4: Connecting the Subwoofer and Recorder (page 22)

m

Step 5: Connecting the TV Aerial (page 23)

m

Step 6: Connecting the TV and Recorder (page 24)

m

Step 7: Connecting the Mains Leads (page 28)

m

Step 8: Easy Setup (page 34)

Steps 1 to 4 are for the speaker system; steps 5 and 6 for the recorder. After finishing all of the hookups, connect the mains leads in step 7, and start setting up the system in “Step 8: Easy Setup.”

Notes

•Plug cords securely to prevent unwanted noise.

•See the instructions supplied with the components to be connected.

•You cannot connect this recorder to a TV that does not have a SCART or video input jack.

•Be sure to disconnect the mains lead of each component before connecting.

Step 1: Unpacking

Check that you have the following items.

•DVD recorder (1)

•Mains lead (1)

•TV aerial cable (1)

•Active subwoofer (1)

•Speakers (5)

•AM loop aerial (1)

•FM wire aerial (1)

•Speaker cords (short) (3)

•Speaker cords (long) (2)

•System cord (1)

•Food pads for the active subwoofer*1 (4)

•Remote commander (remote) (1)

•R6 (size AA) batteries (2)

•Operating Instructions (1)

•Hookup Guide (card) (1)

The following is also included for speaker installation.

For DAR-RH7000:

•Speaker stands (2)

•Covers of speaker stands (2)

•Screws (4)

•Foot pads*2 (20)

For DAR-RH1000:

• Wall-mount pads (8)

*1Attach to the bottom of the subwoofer.

*2Attach to the bottom or rear of the speakers.

12