◆TV Type
If you have a
◆Component Out
If you are using the COMPONENT VIDEO OUT jack, select “On.”
◆Line3 Input
If you will connect a decoder to the LINE 3/ DECODER jack, select “Yes.”
◆Line1 Output
To output video signals, select “Video.”
To output S video signals, select “S Video.” To output RGB signals, select “RGB.” Select “Video” to enjoy the SMARTLINK features.
•If you set “Component Out” to “On,” you cannot select “RGB.”
•If you set “Line3 Input” to “Yes,” you cannot select “S Video.”
◆Room Size
Select a room size from “Small,” “Medium,” or “Large.” Distance of each speaker will be set automatically.
| Speaker Distance Settings | |||
| Front | Centre | Surround | |
|
|
|
| |
Small | 1.6 m | 1.6 m | 1.6 m | |
(default) | ||||
|
|
| ||
|
|
|
| |
Medium | 2.4 m | 2.2 m | 2.4 m | |
|
|
|
| |
Large | 3.4 m | 3.0 m | 3.4 m | |
|
|
|
|
3 Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press O RETURN.
To
Make detailed adjustments to each speaker’s distance, loudness, and position settings. See “Speaker Settings (Speaker)” on page 100.
zHints
•If you want to change each setting, see “Settings and Adjustments” (page 90).
•If you want to run “Easy Setup” again, select “Easy Setup” from “SETUP” in the System Menu (page 104).
Note
If the Room Size display does not appear, check that the subwoofer is turned on, and that the system cord is connected securely.
Basic hookups and settings are complete. You are ready to start using the system.
Settings and Hookups
35