Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack. Disconnect the recorder from the mains when connecting the tuner.
To use the
TV
to SCART input
Satellite tuner, etc.
SCART cord (not supplied)
to i LINE 1 – TV | to i LINE 3/DECODER | ||
| LINE 1 - TV | LINE 3/ |
|
|
|
| Y |
IN |
| DECODER |
|
OUT | PB / CB | ||
| |||
|
|
| PR / CR |
AERIAL |
|
| ~ AC IN |
SYSTEM CONNECTOR | LINE 4 IN | LINE OUT | COMPONENT |
VIDEO OUT | |||
DVD recorder
Settings and Hookups
If the satellite tuner can output RGB signals
This recorder accepts RGB signals. If the satellite tuner can output RGB signals, connect the TV SCART connector on the satellite tuner to the LINE 3/DECODER jack, and set “Line3 Input” of “Scart Setting” to “Video/RGB” in “Video” setup (page 96). Note that this connection and setup disable the SMARTLINK function. If you want to use the SMARTLINK function with a compatible set top box, see the instructions supplied with the set top box.
If you want to use the Synchro Rec function
This connection is necessary to use the Synchro- Recording function. See “Recording from connected equipment with a timer (Synchro Rec)” on page 57.
Set “Line3 Input” of “Scart Setting” in “Video” setup (page 96) according to the specifications of
your satellite tuner. See your satellite tuner’s instructions for more information.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the LINE 3/DECODER jack. Then set “Line3 Input” of “Scart Setting” according to the specifications of the VCR SCART jack on your satellite tuner.
Notes
•Do not set “Line3 Input” of “Scart Setting” in “Video” setup to “Decoder.”
•
•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected tuner.
•DTS audio signals of CDs/DVDs are output only to this speaker system, not to the LINE jacks.
,continued 31