5Attach the cover.

Notes

•Set both speakers to the same height.

•You can install the front and surround speakers on optional speaker stands (WS-FV20 or WS-FV11).

When detaching the speakers from their stands

Insert a flathead screwdriver (not supplied) into the notch of the cover, and remove the cover from the stand.

Flathead screwdriver (not supplied)

Note

Detach the speaker carefully to prevent pinching your fingers between the speaker and speaker stand.

To attach the supplied foot pads

If you are to place the centre speaker on a rack, attach the supplied foot pads to the bottom of the speaker. Make sure that the hole on the back of the speaker is in the right direction, as illustrated below.

Foot pad

zHint

When placing the front speakers or the surround speakers vertically, attach the supplied foot pads to the bottom face of each speaker.

18