5 Press </M/m/, to select the character you want to enter, and press ENTER.
The selected character appears at the top of the display.
Example: Input Title Name
Input Title Name
1 |
| 6 | "A" |
2 | Back | 7 | "a" |
3 | Clear All | 8 | Symbol |
4 | Space | 9 | Cancel |
5 |
| 0 | Finish |
The type of characters will change according to the language you select in “Easy Setup.” Some languages allow you to enter an accent mark.
To enter a letter with an accent mark, select an accent followed by the letter.
Example: Select “ ` ” and then “a” to enter “à.” To insert a space, select “Space.”
6 Repeat steps 4 and 5 to enter other characters.
Input row
Input Title Name
1 | - |
| 6 | "A" |
2 | c | Back | 7 | "a" |
3 | f | Clear All | 8 | Symbol |
4 |
| Space | 9 | Cancel |
5 |
|
| 0 | Finish |
To erase a character, move the cursor to the right of the character at the input row. Select “Back” and press ENTER.
To insert a character, move the cursor to the right of the point where you want to insert the character. Select the character and press
ENTER.
To erase all of the characters, select “Clear All” and press ENTER.
7 Select “Finish,” and press ENTER.
To cancel the setting, select “Cancel.”
To use the number buttons
You can also use the number buttons to enter characters.
1In step 5 above, press a number button repeatedly to select a character. Example:
Press the number 3 button once to enter “D.” Press the number 3 button three times to enter “F.”
2Press SET and select the next character.
3Select “Finish” and press ENTER.
zHints
•You can erase all displayed characters by pressing and holding CLEAR for two seconds or more.
•You can switch between “A”
44