You can control the recorder and the speaker system using the supplied remote. Insert two Size R6 (AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point the remote at 
(remote sensor) on the recorder.
Notes
•To operate a non Sony TV, set the code number of the TV’s manufacturer (page 88).
•Use the batteries correctly to avoid possible leakage and corrosion. Do not touch the liquid with bare hands should leakage occur. Observe the following:
–Do not use a new battery with an old battery, or batteries of different manufacturers.
–Do not attempt to recharge the batteries.
–If you do not intend to use the remote for an extended period of time, remove the batteries.
–If battery leakage occurs, wipe out any liquid inside the battery compartment, and insert new batteries.
•Do not expose the remote sensors (marked 
on the recorder) to strong light, such as direct sunlight or lighting apparatus. The system may not respond to the remote.
Settings and Hookups
13