zHint

You can play the recorded programme by selecting the programme title in the Title List.

Notes

•If a message indicating that the disc is full appears on the screen, change the disc, or make available space for the recording (HDD/DVD+RW/DVD-RW only)

(page 74).

•Check that the clock is correctly set before setting the timer recording. If not, the timer recording cannot be made.

To record a satellite programme, turn on the satellite tuner and select the satellite programme you want to record. Leave the satellite tuner turned on until the recorder finishes recording. If you connect equipment with a timer function, you can use the Synchro Rec function (page 57).

•Even if the timer is set for the same daily or weekly

programme, the timer recording cannot be made if it overlaps with a programme that has priority. “ ” will appear next to the overlapped setting in the Timer List. Check the priority order of the settings.

•Even if the timer is set, timer recordings cannot be made while recording a programme that has priority.

•The Rec Mode Adjust function only works with a timer recording and the PDC/VPS function set to off. It does not function with Quick Timer or Synchro Rec. In addition, the Rec Mode Adjust function does not work when recording to the HDD while “Auto Title Erase” is set to “On.”

•The beginning of some recordings may not be made when using the PDC/VPS function.

•You cannot extend recording time when “PDC/VPS” is set to “On.”

Recording TV programmes using the Video Plus+ system

The Video Plus+ system is a feature that simplifies setting the timer. Just enter the Plus Code number listed in the TV programme guide. The date, time, and programme position of that programme are set automatically.

Check that the programme positions are correctly set in “Channel Setting” in “Settings” setup (page 90).

Number

1

2

3

buttons, SET

4

5

6

7 8 9

CLEAR 0

TIMER

</M/m/,,

ENTER

z REC

x REC STOP

1 Press TIMER.

Timer - VIDEO Plus+

Set the timer by entering the timer code.

OK

PlusCode No.

Cancel

Standard

 

•If the “Timer – Standard” display appears, press < to switch the display to “VIDEO Plus+.”

2 Press the number buttons to enter a Plus Code number, and press SET.

•If you make a mistake, press CLEAR and re- enter the correct number.

52