There is no sound.
Press VOLUME + (or touch VOLUME + on the unit) repeatedly.
The headphones are connected to the PHONES jack .
Check the speaker connections (page 21).
There is no audio output during Rec Timer.
The system is in pause mode, in Slow-
motion Play or in Lock Search. Press (or touch on the unit) to start the playback.
There is no microphone sound.
Press VOLUME + (or touch VOLUME + on the unit) repeatedly or turn MIC LEVEL on the unit clockwise to adjust the microphone volume.
Make sure the microphone is connected to the MIC jack correctly.
Make sure the microphone is turned on.
There is severe hum or noise.
A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR.
Move the unit away from the source of noise.
Connect the unit to a different wall outlet.
Install a noise filter (commercially available) to the power cord.
The timer does not function.
Check the timer setting and set the correct time (page 97).
Cancel the Sleep Timer function.
The remote does not function.
Remove the obstacles between the remote and the unit.
Move the remote closer to the unit.
Point the remote at the unit’s sensor.
Replace the batteries (R6/size AA).
Locate the unit away from the fluorescent light.
There is acoustic feedback.
Reduce the volume.
Move the microphone away from the speakers or change the direction of the microphone.
The color irregularity on a TV screen persists.
Turn off the TV set once, then turn it on after 15 to 30 minutes. If the color irregularity still persists, place the speakers farther away from the TV set.
Information Additional
Continued