5 Set the time to stop playback or recording using the same procedure as step 4.
6 Select the sound source or prepare the tape.
For Play Timer:
Press or repeatedly until the music source (DVD, tape or tuner) you want appears in the display, then press ENTER . The display will show the timer settings.
For Rec Timer:
Load a recordable tape into the tape deck. Press DIRECTION on the
Other operations
To | Do this | |
Check the | 1 | Press TIMER MENU |
setting |
| . |
|
| “TIMER SEL?” |
| 2 | flashes in the display. |
| Press ENTER . | |
| 3 | Press or |
|
| repeatedly to select |
|
| “PLAY SELECT?” |
|
| or “REC SELECT?,” |
|
| then press ENTER |
|
| . |
Change the | Start from step 1. | |
setting |
|
|
unit repeatedly to select “” to record on one side or select “” or “” to record on both sides. When recording from the reverse side, press (or touch on the unit) repeatedly until the indicator lights up to start playback of the reverse side. Press at the point where you want to start recording.
Cancel the Play Timer
1Press TIMER MENU
.
“TIMER SEL?” flashes in the display.
2Press ENTER .
3Press or repeatedly to select
“TIMER OFF?,” then press ENTER .
When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of reverse side.
Notes
If you use the Play Timer or Rec Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
The Play Timer and Rec Timer will not be activated if the system is turned on or if “STANDBY” flashes in the display.
The volume is reduced to minimum during Rec Timer.
The system turns on 30 seconds before the preset time. Do not operate the system from the time the system turns on until the recording starts.