3Hang the speakers on the screws.
Hole on the back of the speaker
5.3 mm
9 mm
Speaker settings
To enjoy DVD VIDEOs and other discs with multichannel sound and Dolby surround effects, the speakers need to be adjusted. Set the distance from the listening position to the speakers, and the balance and level. Then use the test tone to adjust the volume of each speaker to the same level.
For details, see “Setting the speakers” (page 68).
Notes
Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the surround speakers on a vertical and flat wall where reinforcement is applied.
Contact a screw shop or installer regarding the wall material or screws to be used.
Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.