When connecting a video deck
Connect the video deck to the TV using a video cord (not supplied). However, do not connect this unit to the TV through the video deck. Otherwise, you may experience video leakage when watching video images from this system. Connect this unit directly to the TV as shown below.
TV
Video deck |
| Unit |
|
Do not connect directly
Tip
For higher quality video images:
Use the optional component video cords to connect the COMPONENT VIDEO input jacks on your TV to the COMPONENT VIDEO OUT jacks of this unit. If your TV is compatible with progressive format
file signals, use this connection and press PROGRESSIVE on the unit repeatedly until “P AUTO” or “P VIDEO” appears in the display (page 25).
You can use an optional S Video cord to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack of this unit.
Changing the color system
(Except for European and Russian models)
Set the color system to PAL or NTSC depending on the color system of your TV.
The default setting for color system is different depending on the area. Each time you perform the procedure below, the color system changes as follows:
NTSC PAL
1Press /to turn off the system.
2Press DISPLAY repeatedly until “SONY DEMO” appears in the display.
3Press /on the unit while touching on the unit.
The system turns on automatically and the color system is changed.
“COLOR NTSC” or “COLOR PAL” appears in the display.