Optional components
There is no sound.
Refer to General item “There is no sound.” (page 109) and check the condition of the system.
Connect the component properly (page
103) while checking:
if the cords are connected properly.
if the cord plugs are firmly inserted all the way.
Turn on the connected component.
Refer to the operating instructions supplied with the connected component and start playing.
If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows:
Use buttons on the unit to reset the system to its factory default settings.
1Unplug the power cord.
2Plug the power cord back in.
3Press to turn on the system.
4While holding down DISPLAY , touch and press at the same time.
“COLD RESET” appears in the display. The system is reset to the factory settings except for DVD settings. You should set the settings you made, such as the preset stations, clock and timer.
To return the DVD setup to the default settings*, perform reset as follows:
1Press 
DISPLAY when playback is stopped.
The Control Menu appears on the TV screen.
2Press or repeatedly to select 
(SETUP), then press ENTER
.
3Press or repeatedly to select “RESET,” then press ENTER .
4Press or repeatedly to select “YES,” then press ENTER .
It takes a few seconds to complete. Do not press when resetting the system.
* Except for Parental Control settings
Information Additional
Continued