Messages
One of the following messages may appear or flash in the front panel display during operation.
Cannot Play
A disc that cannot be played back was inserted.
A DVD VIDEO with unsupported region code was inserted.
Data Error
The MP3 audio track, JPEG image file and DivX video file you want to play back is damaged.
The MP3 audio track does not conform to MPEG 1 Audio Layer 3 format.
The JPEG image file does not conform to DCF format.
The MP3 audio track has the extension “.MP3” but it is not in MP3 format.
The JPEG image file has the extension “.JPG” or “.JPEG” but it is not in JPEG format.
The DivX video file does not conform to a DivX Certified profiles.
The DivX video file has the extension “.AVI” or “.DIVX” but it is not in DivX format.
Device Error
The USB device could not be recognized.
Hub No Support
The USB device is connected to this system through a hub.
Invalid
You have pressed an invalid button.
JPEG
The playback mode is “IMAGE (JPEG)” and a JPEG image file is being played back.
No Audio
The inserted USB device does not contain MP3 audio tracks.
No Device
No USB device is connected or the connected USB device has been stopped.
No Disc
There is no disc in the disc slot .
No Support
An unsupported USB device is connected.
No Tab
You cannot record the tape because the tab has been removed from the tape.
No Tape
There is no tape in the tape deck.
Not in Use
You have pressed a button whose operation is not allowed or invalid at that time.
OFF TIME NG!
The on time and off time of Play Timer or Rec Timer is the same.
Over Current
An over current was detected.
Information Additional
Continued