For printing procedures, refer to the manual of the Bluetooth device you use.

To select the printer from a Bluetooth- compliant device, select “Sony DPP- FP60 ##”. (“##” stands for the two figures from the right of the address displayed in the LCD screen.):

When input of Pass code* is required

Input “0000”. You cannot change the pass cord with the printer.

*Pass code is often referred to as “pass key” or “PIN code”.

Notes

•The communication distance of the product may vary depending on the obstacles between the product (a human body, metal object, or wall) and mobile phone or other device.

•Sensitivity of the Bluetooth communication may be affected in the following conditions:

-When there is an obstacle between the product and the mobile phone or other product such as a human body, metal object, or a wall.

-Were a wireless LAN is established or a microwave oven is being used near-by, or other electromagnetic wave is emitted.

•Since a Bluetooth device and a wireless LAN (IEEE802.11b/g) device use the same frequency ranges, wave interferences may occur when the product is used near a device equipped with a wireless LAN. This may cause deterioration in the communication speed and connection conditions. If this occurs, take the following measures:

-Keep a distance of at the nearest 10 m from a wireless LAN device when you connect the product to the mobile phone.

–Turn off the wireless LAN device in case you should use the product within 10 m from the wireless LAN device.

•It is not guaranteed that this product works with all devices enabled with Bluetooth wireless technology.

•Do not use the DPPA-BT1 outsides the area you purchased it. Depending on the areas, the use of this product may infringe the wave regulations and may be subject to its penalty.

•Sony cannot assume any responsibilities for any information leakage that may be caused in Bluetooth communications.

•Sony cannot accept responsibilities for any failure to satisfy the protection requirements resulting from a non-recommended modification or use of the product.

•For customer support information, please refer to the operating instructions of your printer.

PCautions

•Radio waves from a Bluetooth device may adversely affect the operations of electrical and medical devices, and could lead to accidents due to malfunctions. Make sure to turn off the product and mobile phone and do not use this product in the following places:

-Inside the medical facilities, trains, airplanes, gas stations or other places that may emit flammable gas.

-near automatic doors or fire alarms or other automatically controlled devices.

•Keep this product at least 22 cm away from cardiac pacemakers. Radio waves from this product may adversely affect the operation of cardiac pacemakers.

•Do not disassemble or modify this product. Doing so could result in injury, electric shock, or fire.

30 GB