Printing from an external device
You can connect a
Notes
•We cannot guarantee connection with all types of mass storage devices.
•If a memory card is inserted in the printer, the printer cannot read the signal from an external device connected to the PictBridge connector of the printer. Remove the memory card, if any.
1 Set your digital camera or other external device ready for printing with the Mass
The settings and operations that are necessary before connection differ
depending on the external device you use. For details, see the operating instructions of the external device. (In case of Sony
2 Connect the printer to the AC power source (. Read This First).
3 Press 1 (on/standby) switch to turn on the printer.
The 1 (on/standby) indicator of the printer lights in yellow green.
4 Connect a camera or an external device to the PictBridge connector of the printer.
Use the USB cable supplied with the digital camera or other external device, if necessary.
Printing in the direct mode is possible.
To PictBridge connector
To USB connector
Notes
•If you use a commercially available USB cable, please use the one shorter than 3m in length.
•While the access indicator of the external device is flashing, never turn off the power of the printer or an external device nor remove the USB cable. The data inside the external device may be damaged. We cannot guarantee any damages that may be caused by data loss or damage.
•You cannot use a USB hub or a USB device equipped with a USB hub.
•Encoded or compressed date by fingerprint authentication or password cannot be used.
•The following Sony USB devices cannot be used since they contain fingerprint authentication system or a USB hub: USM16A/S, USM32A/S, USM64A/S, USM128A/S,USM256A/S, USM128B/BMS, USM64C, USM128C, USM128F
device external or camera PictBridge a from Printing