copyrightprotected data correctly. When the authentication is established, the data encryption is performed. When the data is played, the authentication is also performed. Only when authentication is established, the data is decrypted to the original status and played.
*2 The printer is equipped with a slot compatible with both
*3 The printer supports FAT32. The printer has been demonstrated as operable with a “Memory Stick” with a capacity of 8GB or smaller manufactured by Sony Corporation. However, we do not guarantee the operations of all the “Memory Stick” media.
In addition, the printer does not support parallel data transfer.
*4 “M2” is an abbreviation for “Memory Stick Micro”. In this section, “M2” is used to describe “Memory Stick Micro”.
For the latest information on available medium or others, access the following home page:
http://www.memorystick.com/en/
support/support.html
Select the area where you use your printer, and then select “Digital Printer” from each area page.
Notes on use
•For the latest information on the “Memory Stick” that the printer supports, see the “Memory Stick” compatibilities information on the Sony web site.
•Do not insert multiple “Memory Stick” at the same time, which may cause trouble with the printer.
•When using a “Memory Stick”, make sure to check correct insertion direction. Wrong usage may cause trouble with the printer.
•When using the “Memory Stick Micro” with
the printer, always insert it into an M2 adaptor.
•If you insert the “Memory Stick Micro” into the printer without an M2 adaptor, you may be unable to remove the “Memory Stick Micro”.
•If you insert the “Memory Stick Micro” into an M2 adaptor, and insert the M2 adaptor into the Memory Stick Duo adaptor, the printer may not operate properly.
•Do not place the “Memory Stick Duo”, an “Memory Stick
•Avoid removing the “Memory Stick” from the printer while the printer is reading or writing data.
•Data may be damaged in such occasions:
–“Memory Stick” is removed or the printer is turned off during a read or write operation.
–“Memory Stick” is used in a location subject to static electricity or electrical noises.
•We recommend that you save backup of the important data.
•The data processed with the computer may not be played with the printer.
•When you format a “Memory Stick”, use the format function of the printer or your digital camera. If you format a “Memory Stick” with your computer, images may not be displayed properly.
•When you format a “Memory Stick”, all the data including the protected image files will be erased. To avoid erasing important data by accident, make sure to check the content before formatting.
•You cannot record, edit or delete data if you slide the
Connector
Write Write
enable protect
position position
LOCK LOCK
Place the label here.