•When you use a “Memory Stick Duo” without the write-protect switch, be careful not to edit or delete the data by accident.

•When you slide the write-protect switch of the “Memory Stick Duo”, use a thin-pointed device.

•Do not attach any other material than the supplied label on the labeling position. When you attach the supplied label, be sure to attach it to the labeling position. Be careful that the label does not stick out.

•When you write on the memo area of the attached label, do not write forcefully.

•When you carry or store the “Memory Stick”, put it in the case designed for the “Memory Stick”.

•Do not touch the terminal of the “Memory Stick” with your hand or a metal object.

•Do not strike, bend or drop the “Memory Stick”.

•Do not disassemble or modify the “Memory Stick”.

•Do not expose the “Memory Stick” to water.

•Do not use or store the “Memory Stick” under the following conditions:

–Locations beyond the required operational conditions including locations such as the hot interior of a car parked in the sun or/ and in the summer, the outdoors exposed to direct sunlight, or a place near a heater.

–Humid locations or locations with corrosive substances present

About the SD card

The SD card slot of the printer allows you to use the following:

•SD memory card*1*2

•SDHC memory card*3

•MMC standard memory card*4

We do not guarantee proper operations for all types of SD memory cards and MMC standard memory cards.

*1 The printer has been demonstrated as operable with an SD card with a capacity of 2 GB or smaller.

*2 When you use a miniSD card, use a miniSD

card adaptor. If you insert a miniSD card without the adaptor into a slot of the printer, you may not be able to remove it.

*3 The printer has been demonstrated as operable with an SDHC card with a capacity of 4 GB or smaller.

*4 The printer has been demonstrated as operable with an MMC standard memory card with a capacity of 2 GB or smaller .

Notes on use

•When using a card, make sure to check correct insertion direction of the card and correct insertion slot.

•You cannot read or write the data subject to the copyright protection.

•Do not strike, drop, or bend a card.

•Do not disassemble or modify a card.

•Do not expose a card to water.

•Avoid using a card in areas subject to high humidity, since it may be easily affected by the humidity.

•Do not use or store a card in a location subject to:

–extremely high temperature such as the hot inside of a car or the outdoors exposed to a direct sunlight, or a place near a heater.

–direct sunlight

–high humidity or corrosive substances

–static electricity or electrical noises

•When you carry or store a card, put it in the case supplied with it.

•Do not remove a card or turn off the printer while the printer is reading or writing data and the access indicator is flashing.

Otherwise, data may be rendered unreadable or erased.

information Additional

67 GB