Connecting with a digital camera
Symptom | Check | Cause/Solutions | |
The PictBridge | • Is the digital camera | cConnect the cable correctly. | |
mark does not | connected correctly? |
| |
appear on the | • Is the 1 (on/standby) | cTurn on the 1 (on/standby) switch | |
LCD screen of | |||
switch turned on? |
| ||
the digital |
| ||
|
| ||
camera. | • Does the firmware of your | cSee the manual supplied with your | |
| digital camera support the | camera, or consult with the | |
| printer? | manufacturer. | |
|
|
| |
| • Is “Connecting” | cThe message is not displayed while the | |
| displayed? | printer is in the Edit, Creative Print, or | |
|
| other menu modes. Exit the menu and | |
|
| then connect the cable again. | |
|
| cDisconnect the digital camera and the | |
|
| printer and then connect them again. Or | |
|
| turn off and then on the printer and the | |
|
| digital camera. | |
|
|
| |
| • Is the USB setting of your | c Set the USB setting of your camera to | |
| camera in PictBridge mode? | the PictBridge mode. | |
|
|
| |
| • Is printing in process? | cConnect the cable again after printing | |
|
| is complete. | |
|
|
| |
You connect and |
| cThe printer has developed an over- | |
disconnect the |
| current error. Unplug the AC power | |
USB cable, but |
| cord of the printer, plug it in again, | |
nothing happens. |
| and then press the 1 (on/standby) | |
|
| switch to recover from the error. |
You cannot stop printing even if you pressed
CANCEL.
cThe next print from the one currently printed will be canceled.
cDepending on the digital camera you use, you cannot cancel printing from the printer. Operate the digital camera to stop printing. Refer to the operating instructions of the digital camera.
You cannot make Index printing.
•Is the message “Could not create printing data for some images.” displayed?
cThe printer cannot print Index print of the DPOF printing. To make Index printing, insert the memory card directly (.Read This First) or use a mass storage external device (.page 31).