The setup starts.

5 When “Sony DPP-FP60/70/90 printer driver has been successfully installed.” dialog is displayed, click “Finish”.

6 Connect the printer to the AC power source (. Read This First).

7 Press 1 (on/standby) switch to turn on the printer.

8 Connect the USB connectors of the printer and your PC with a USB cable (not supplied).

Printer driver installation starts automatically.

To USB connector

 

To USB

Windows PC

connector

Note

Use a B-type USB cable shorter than 3m in length.

9 Wait for a while, then check to see that “Sony DPP-FP60” is added to the “Printers and Faxes”.

10 When the installation is complete, remove the CD-ROM from your PC and keep it for future use.

To continue to install the Picture Motion Browser software, follow the procedures from step 2 on page 35.

Notes

•If the installation fails, remove the printer from your PC, restart your PC, and then do the installation procedures from the step 2.

•After installation, the “Sony DPP-FP60” is not set as the default printer. Set the printer you use for each application.

•The supplied CD-ROM will be required when you uninstall or re-install the printer driver. Keep it in good order for possible future use.

•Before you use the printer, read the Readme file (the Readme folder of the CD- ROMcEnglish foldercReadme.txt).

When the software is installed

The is displayed on the Windows desktop, as well as a shortcut to the web site for printer customer registration. If you finish registration, you can find support information at: http://www.sony.net/registration/di/

34 GB