Sony DPP-FP60, DPP-FP60PT manual 50 GB

Symptom	Check	Cause/Solutions
The image	• Did you select “Yes” for	cSet “No” by selecting Menu - Print
cannot be	“Borders” in the Print	setup - Borders. (.page 24)
printed fully in	setup menu?
the print range.
	• Is the aspect ratio of the	cDepending on the type of digital
Borders
	image correct?	camera used, the aspect ratio of the
remains.
		recorded image differs, so the image
		may not be printed covering the entire
		printable area.
Even if	• Is the image edited and	cWhen you edit and save an image with
“Borders” is set	saved with “Borders”-	“Borders”-“Yes”setting, it is saved as a
to “No”, the	“Yes” setting?	print image including the blank areas.
image is printed		Even if you print it with “Borders”-
with borders on		“No” setting, you cannot eliminate the
both sides.		borders on both sides of a print. To
		print without borders, edit and save an
		image with “Borders”-“No” setting.
		(.page 24)
The whole area	• Did you set Borders”-	cYou can print the whole area of an
of an image	“Yes” in the Print setup	image by selecting “Borders” - “No”
cannot be	menu?	in the Print setup menu. (.page 24)
printed.
The image is	• Did you rotate the image	cDepending on the type of digital
stretched	or add other process?	camera used, the image may be
horizontally		stretched vertically if it has been
when printed.		rotated or processed using your
		digital camera. This is not because of
		trouble with the printer, but because
		the image was rewritten with your
		digital camera.
The image is	• Is the paper tray inserted	cRe-insert the paper tray firmly straight
printed at an	properly?	in to the end.
angle.
There are white		cThe print head or paper path may be
lines or dots on		soiled. Use the supplied cleaning
the printed		cartridge and sheet to clean the head
pictures.		and path.

50 GB