On the Index
aSet the MODE dial to , then press the SMART ZOOM W button twice to switch to the Index
bMove the image you want to send to the center with b/B.
cPress Bluetooth.
The Bluetooth menu appears.
<Sending camera>
RECEIVE
SEND
OK BACK/NEXT
dSelect [SEND] with V, then press z.
The Bluetooth function starts up and the SELECT THE RECEIVER screen appears.
eDisplay the record of the receiving camera with b/B or perform a new search (page 7).
fSelect [CONNECT] with v, then press z.
“SENDING” is indicated and the selected image is sent to the receiver camera.
<Sending camera>
60min
SONY
SENDING
EXIT
OK
<Receiving camera>
60min | 101 |
SONY
0/0
RECEIVING
EXIT
OK
•If passkey entry is required on the sending and receiving cameras, enter the passkey (page 17).
•If you run past the time limit for the passkey entry (30 seconds), connect again.
gTo send other images, move the desired image to the center with b/B, then press z.
To cancel the sending operation
Sending Camera
Select [EXIT], then press z in Step 6 or 7. The Bluetooth function is turned off and the Bluetooth menu appears again.
Sending images to a Sony VAIO
MODE dial:
You can send images to a VAIO equipped with the
MODE dial
Bluetooth
Control button
•For the latest information about connection using a VAIO, see the following URL: http://www.sony- imaging.com/support/
•You can also operate with the index (nine- or
•For the image types you can send, see page 19.
10