Discovering devices
– New search
MODE dial:
You have to discover a Bluetooth device when the camera has not been connected to
aSet the MODE dial to and display the image you want to send.
bPress Bluetooth.
The Bluetooth menu appears.
<Your camera>
Sending images
<Your camera>
60min
1 UNIT(S) FOUND
SEARCHING Bluetooth DEVICE
STOP
OK
The device discovery operation is
the device previously or when the camera does not have information on the device in the record for the connected device.
60min | 2272 |
101 1/1
completed, the SELECT THE | Sending | ||
RECEIVER screen appears again. | |||
<Your camera> |
|
| |
|
| images | |
|
|
| |
SELECT THE RECEIVER | 1/1 |
| |
|
|
|
Before operation
Be sure to set the Bluetooth device to allow it to be connected.
MODE dial
Bluetooth
Control button
SEND RECEIVE PRINT
OK
cSelect [SEND] with b, then press z.
The Bluetooth function starts up and the SELECT THE RECEIVER screen appears.
<Your camera>
SELECT THE RECEIVER
NO RECORD FOR CONNECTED DEVICE
TRY A NEW SEARCH
CONNECT
EXIT
NEW SEARCH
OK
dSelect [NEW SEARCH] with V, then press z.
“SEARCHING Bluetooth DEVICE” is indicated and the number of Bluetooth devices discovered is indicated.
NAME : |
[SONY |
ADDRESS : |
TYPE : CAMERA
SUPPORTED : UNKNOWN
SEARCH : NEW
CONNECT
EXIT
NEW SEARCH
OK
To cancel the new search
Select [STOP], then press z in Step 4. The devices discovered up to the point you stop the discovery operation are added to the SELECT THE RECEIVER screen.
•You may not be able to discover the desired device if the setting of the device is not discoverable. If you cannot discover the desired device by repeating a new search, check the setting of the device.
•The maximum number of devices that can be discoverable during a new search is 10 devices.
•The result of new search is displayed along with the record.
7