Symptom

Cause

 

 

Solution

 

 

The connection is

• The capacity of the “Memory Stick” is

p Delete images saved in the “Memory Stick,” or format it (see

disconnected.

insufficient.

 

 

the operating instructions).

 

 

 

 

P, or SCN.

p Replace the “Memory Stick” (see the operating instructions).

 

• The MODE dial is not set to

,

p Set the MODE dial to

,

P, or SCN (see the operating

 

 

 

 

instructions).

 

 

 

• The “Memory Stick” was removed.

 

pInsert the Memory Stick” and connect again (page 14).

 

• The camera has been turned off by rotating the

p Turn on the camera and connect to the device again (page 14).

 

lens portion or for some other reason.

 

 

 

 

• The device disconnected the connection.

p Check the status of the device and connect to the device again.

 

 

 

 

For details on the device, refer to the operating instructions

 

 

 

 

supplied with the device.

 

 

 

• The device is placed outside of radio wave

p Move the device closer to your camera.

 

range.

 

 

 

 

 

 

• The antenna portion of your camera or the

p Do not cover the antenna portion (page 4).

 

device is covered with your hand etc.

 

 

 

 

 

• The device is disconnected the Bluetooth

p Set the device so that it is connectable. For details, refer to the

 

connection.

 

 

operating instructions supplied with the device.

 

• The camera ran past the time limit of the remote

p The maximum time you can use the camera as a remote camera

 

camera time limit (about three hours).

is three hours. The camera automatically turns off after three

 

 

 

 

hours.

 

 

 

 

 

 

 

The shutter clicks even if

• The shutter always clicks during the remote

 

 

you set it not to click.

camera mode.

 

 

 

 

 

 

 

 

 

 

The buttons do not

• The buttons do not function during the remote

 

 

function.

camera mode except for SMART ZOOM,

 

 

 

 

POWER, and the MODE dial .

 

 

 

 

 

 

 

 

 

 

The self-timer is canceled.

• The self-timer cannot be used in the remote

 

 

 

camera mode.

 

 

 

 

 

 

 

 

 

 

You cannot perform

• The flash is being charged.

 

 

p Wait until the charging is finished and perform remote shooting

remote shooting.

 

 

 

(see the operating instructions).

 

 

• The capacity of the “Memory Stick” is

p Delete the images saved in the “Memory Stick,” or format it

 

insufficient.

 

 

(see the operating instructions).

 

 

 

 

 

p Replace the “Memory Stick” (see the operating instructions).

 

 

 

 

 

 

 

26