Warnings and messages
The following messages appear on the LCD screen.
Message | Meaning/ Corrective Action |
|
|
FAIL TO CERTIFICATE | • You did not enter the passkey within 30 seconds. Enter it within 30 seconds (page 17). |
|
|
INPUT THE SAME LETTERS INTO |
|
|
|
THE DEVICE TO BE CONNECTED AND |
|
|
|
THIS DEVICE WITHIN 30 SECS. |
|
|
|
|
|
|
|
NO REQUEST FROM THE SENDER | • If the camera does not receive any requests of connection or sending images from the device for |
|
|
| five minutes, the connection is disconnected or the camera becomes |
|
|
NO REQUEST FROM THE CONTROL |
|
| |
again. |
|
| |
|
|
| |
|
|
|
|
NO RESPONSE FROM THE RECEIVER | • If the camera does not receive any responses from a receiver/printer for 10 minutes, the |
|
|
| connection is disconnected. Check the device status. |
|
|
NO RESPONSE FROM THE PRINTER |
|
| |
|
|
| |
|
|
|
|
DISCONNECTED | • Since the device disconnected for some reason or the distance between the camera and the device |
|
|
| is too great far, the connection was disconnected. |
|
|
|
| ||
|
|
|
|
REFUSED TO CONNECT | • The connection was rejected by the device you intend to connect to by the setting or operations of that |
| Additional |
| device. Change the setting of the device. |
| |
|
|
| |
|
|
|
|
REFUSED BY THE RECEIVER | • The request to send an image, or the image itself was rejected. |
|
|
| • You are trying to send or print an incompatible image. |
|
|
REFUSED BY THE PRINTER |
| information | |
|
| ||
|
|
| |
RECEIVER’S SERVICE IS | • The device is not compatible with BIP features (page 4). |
| |
|
| ||
NOT SUPPORTED |
|
|
|
|
|
|
|
PRINTER’S SERVICE IS |
|
|
|
NOT SUPPORTED |
|
|
|
|
|
|
|
NOT FOUND | • The camera could not discover the desired device. Set the device to be connectable . |
|
|
ENABLE THE RECEIVER |
|
|
|
|
|
|
|
NOT FOUND |
|
|
|
ENABLE PRINTER TO RECEIVE |
|
|
|
|
|
|
|
29