Symptom | Cause |
| Solution |
|
You cannot send an image | • The capacity of the media of the device (e.g., a | p Delete data from the media (e.g., a “Memory Stick” or hard | ||
to the desired device. | “Memory Stick” or hard disk) is full. | disk) or replace it with a new one (see the operating | ||
|
|
| instructions). |
|
| • The device disconnected the connection. | p Check the status of the device and try to connect to the device | ||
|
|
| again. For details on the device, refer to the operating | |
|
|
| instructions supplied with the device. | |
| • The device is placed outside of radio wave | p Move the device closer to your camera. | ||
| range. |
|
|
|
| • The antenna portion of your camera or the | p Do not cover the antenna portion (page 4). | ||
| device is covered with your hand etc. |
|
| |
| • The application of the device suddenly stops. | p Check the status of the device. For details on the device, refer to | ||
|
|
| the operating instructions supplied with the device. | |
| • The MODE dial is not set to | . | p Set the MODE dial to | and connect again (pages 8, 10). |
| • Your camera has been turned off by rotating the | p Turn on your camera and connect to the device again (pages 8, | ||
| lens portion or for some other reason. | 10). |
| |
| • The number of jobs to be printed by the printer | p The number of images acceptable at one time depends on the | ||
| is over the limit. |
| printer. Wait until the printer is ready to accept images, then | |
|
|
| send images. For details, refer to the operating instructions | |
|
|
| supplied with the printer. |
|
| • There is no paper in the printer. |
| p Supply the printer with paper. For details, refer to the operating | |
|
|
| instructions supplied with the printer. | |
| • There is no ink in the printer. |
| p Change the printer with ink. For details, refer to the operating | |
|
|
| instructions supplied with the printer. | |
|
|
|
| |
DPOF or protect setting is | • The settings for DPOF or protect are not valid in | — |
| |
not valid. | the received images. |
|
|
|
|
|
|
|
|
Receiving
Symptom | Cause | Solution |
The Bluetooth button | • The MODE dial is not set to . | p Set the MODE dial to (see the operating instructions). |
does not work. |
|
|
•The playback zoom function is being used. p Cancel the playback zoom function (see the operating instructions).
22