Sending images to a camera

MODE dial:

You can send images to a camera equipped with the BIP-compatible Bluetooth function.

On the single screen

aSet the MODE dial to and display the image you want to send.

bPress Bluetooth.

The Bluetooth menu appears.

<Sending camera>

<Sending camera>

60min

SONY Cyber–shotX

SENDING

EXIT

OK

<Receiving camera>

60min

101

SONY Cyber–shot 00:0C:3E:3A:4B:69

Before operation

Be sure to set the receiving camera to enable it to receive images (page 12).

60min

2272

101 1/1

0/0

RECEIVING

EXIT

OK

MODE dial

Bluetooth

SMART ZOOM

Control button

•This explanation is given using the DSC-FX77 model.

•For the image types you can send, see page 19.

SEND RECEIVE PRINT

OK

cSelect [SEND] with b, then press z.

The Bluetooth function starts up and the SELECT THE RECEIVER screen appears.

dDisplay the record of the receiving camera with b/B or perform a new search (page 7).

eSelect [CONNECT] with v, then press z.

“SENDING” is indicated and the selected image is sent to the receiving camera.

•If passkey entry is required on the sending and receiving cameras, enter the passkey (page 17).

•If you run past the time limit for the passkey entry (30 seconds), connect again.

fTo send other images, display the desired image with b/B, then press z.

To cancel the sending operation

Sending camera

Select [EXIT], then press z in Step 5 or 6. The Bluetooth function is turned off and the Bluetooth menu appears again.

8