Printing images

MODE dial:

You can send images to a printer equipped with the BIP-compatible Bluetooth function and print images.

Sending images to a printer

aSet the MODE dial on the

camera to and display the image you want to print.

bPress Bluetooth.

The Bluetooth menu appears.

Printing images

If passkey entry is required, enter the same passkey as that of the printer (page 17).

If you run past the time limit for the passkey entry (30 seconds), connect again.

The printer may have a predetermined passkey or its passkey may have been set beforehand. For details on the passkey setting of the printer, refer to the operating instructions supplied with the printer.

Before operation

Turn on the printer, and be sure to set the printer to allow it to be connected.

MODE dial

60min

2272

101 1/1

f To send other images, display

the image you want to print

with b/B, then press z.

The number of images you can send in a

Bluetooth

Control button

You can also perform this operation with the index (nine- or triple-image) screen.

For the image types you can send, see page 19.

16

SEND RECEIVE PRINT

OK

cSelect [PRINT], then press z.

The Bluetooth function starts up and the SELECT THE PRINTER screen appears.

dDisplay the record of the printer with b/B or perform a new search (page 7).

eSelect [CONNECT] with v, then press z.

“PRINTING” is indicated on the camera and the selected image is sent to the printer.

60min

Printer

PRINTING

EXIT

OK

row depends on the printer.

To cancel the sending operation

Select [EXIT], then press z in Step 5 or 6. The Bluetooth function is turned off and the Bluetooth menu appears again.

The camera cannot cancel the printing operation after the image has been sent to the printer. For details to stop the printing, refer to the operating instructions supplied with the printer.

The edges of the image may not be printed depending on the printer setting.

It may take a lot of time to print images, depending on the image size or the printer.