The flash does not work.
You cannot use the flash in the following situations:
[Drive Mode] is set to
(Anti Motion Blur), 
(Night Scene), 
(Fireworks) or 
(High Sensitivity) mode is selected in [Scene Selection].
Shooting in [Sweep Panorama] mode 
Shooting in movie mode
Set the flash to 
(Pet), 
(Gourmet), 
(Landscape), 
(Sports Action) or 
(Sunset) mode. [Details]
Fuzzy white circular spots appear in images shot using the flash.
Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a malfunction. [Details]
The close-up shoot function (Macro) does not work.
The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus adjustment may take some time when shooting a close subject.
(Sports Action), 
(Landscape), 
(Night Scene) or 
(Fireworks) mode is selected in [Scene Selection].
The date and time are not displayed on the screen.
While shooting, the date and time are not displayed. They are displayed only during playback.
The F value and shutter speed flash.
The exposure is incorrect. Correct [Exposure Comp.]. [Details]
The image colors are not correct.
Adjust [White Balance]. [Details]
[Picture Effect] is selected. [Details]
Execute [Initialize] to reset settings to default. [Details]
The image is extremely bright or dark.
Execute [Initialize] to reset settings to default. [Details]
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.
You can see a dark shadow on the image.
Depending on the brightness of the subject, you may see a dark shadow when you change the aperture. This is not a malfunction.
The eyes of the subject come out red.
236
