Using an external power source

Using your camera abroad

Jack cover

AC Adaptor

1 DC plug

,Open the jack cover and connect the AC Adaptor (supplied) to the DC IN jack of your camera.

Open the cover in the arrow direction as illustrated above. Connect the plug with the

vmark facing left.

•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

2 To wall outlet (wall socket)

1

Power cord

2

(mains lead)

 

,Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket).

•When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera.

•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off.

Power sources

You can use your camera in any country or region with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

AC-LS5

•Do not use an electronic transformer (travel converter), as this may cause a malfunction.

started Getting

13