Changing “Image Transfer” settings
You can change “Image Transfer” settings.
When the “Image Transfer” starts, the below window appears.
When you select [Settings] from the above window, you can only change the [Basic] setting.
Copying images without using “Image Transfer”
— Windows 98/98SE/2000/Me
If you do not set to launch “Image Transfer” automatically, you can copy images as following procedure.
a
The contents of the “Memory Stick”
inserted in your camera appear.
•This section describes an example of copying images to the “My Documents” folder.
•When the “Removable Disk” icon is not shown, see the following column.
•When using Windows XP, see page 92.
b
The folder opens.
cDrag and drop the image files into the “My Documents” folder.
The image files are copied to the “My
Documents” folder.
•When you try to copy an image to a folder in which an image with the same file name is stored, the overwrite confirmation message appears. When you want to overwrite the existing image with the new one, the original one is deleted.
When a removable disk icon is not shown
1
The “System Properties” screen appears.
•When using Windows 2000, click [Hardware] on “System Properties” screen.
2Confirm if other devices are already installed.
1Click [Device Manager].
2Confirm if there is a “ Sony DSC”
with a mark under [ Other Devices].
3If you find either of the devices above, follow the steps below to delete them.
1Click [ Sony DSC].
(When using Windows 2000, right-
click [ Sony DSC].)
2Click [Remove] (or [Uninstall] in Windows 2000).
The “Confirm Device Removal” screen appears.
3Click [OK].
The device is deleted.
Try the USB driver installation again using the supplied
computer your on images Enjoying
91