Sony DSC-V1 manual 54

aSet the mode dial to SET UP.

The SET UP screen appears.

bSelect (Camera 2) with v/V

2

and [Bracket Step] with B/v, then press B.

cSelect the desired bracket step value with v/V, then press z. ±1.0EV : Shifts the exposure value by plus or minus 1.0EV.

±0.7EV : Shifts the exposure value by plus or minus 0.7EV.

±0.3EV : Shifts the exposure value by plus or minus 0.3EV.

dSet the mode dial to , P, S, A, M or SCN.

ePress MENU.

The menu appears.

fSelect [Mode] (REC Mode) with b/B, then select [Exp Brktg] with v/V.

gShoot the image.

To return to normal mode

Select [Normal] in step 6.

•You cannot use the flash in this mode.

•During shooting in this mode, the images are not displayed on the screen. Compose the image before pressing the shutter button.

•The focus and white balance are adjusted for the first image, and these settings are also used for the other images.

•When the exposure is manually adjusted (page 49), the adjusted value is used for the center value.

•The recording interval is approximately 0.5 second.

•If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value.

•You cannot select certain shutter speeds*.

*When [ISO] is [800]:

Shutter speeds of 1/25 second or slower When [ISO] is other than [800]: Shutter speeds of 1/6 second or slower

54