•While using the NightShot function, you cannot use the following functions:

–Focus Preset

–LCD screen off

–AE LOCK

–Shooting with hologram AF

–Shooting with the flash

•While using the NightShot function:

–The white balance is set to Auto.

–The metering mode is set to center weighted.

–If you perform any invalid operation, the indicator flashes, and the “Night shot” indicator lights for about five seconds. However, if you press v ( ) in Exposure Bracket, Multi Burst or Burst 3 mode, the

BRK/ / indicator flashes.

•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This may cause your camera to malfunction.

•Images shot using the NightShot function are recorded with a green tint as if viewing an LCD screen.

NightFraming

The NightFraming function enables you to check a subject even at night and then record with natural colors using the flash.

aSet the mode dial to , P or

(Clip Motion).

bSet NIGHTSHOT/ NIGHTFRAMING lever to

NIGHTFRAMING.

The and “Night framing” indicators light. The “Night framing”

indicator turns off after about 5 seconds.

60min

VGA

101

98

S AF

“Night framing”

cPress and hold the shutter button halfway down.

When [Hologram AF] is set to [Off], you may not get a clear focus. Setting [Hologram AF] to [Auto] is recommended.

dPress the shutter button fully down.

The shutter sounds, the flash strobes and the image is recorded.

To cancel the NightFraming function

Set NIGHTSHOT/NIGHTFRAMING lever to z.

•While using the NightFraming function, you cannot use the following functions:

–LCD screen off

–AE LOCK

–Focus Preset

•While using the NightFraming function:

–The white balance is set to Auto.

–The metering mode is set to multi-pattern metering.

–The AF range finder is fixed to the center.

–If you perform any invalid operation while using the NightFraming function, the indicator flashes and the “Night framing”

indicator lights for about five seconds.

•When you press the shutter button halfway down you will hear a sound, but this is not the sound of the shutter releasing. The image is not recorded yet.

•The flash does not function when recording in Burst 3 and in Exposure Bracket modes. If you

press v ( ) the BRK/ indicator flashes.

shooting image still Advanced

57