60min | VGA FINE 101 |
| 96 |
| S AF |
0EV
F2.8
30
| AE/AF lock indicator |
3 | Flashes green t |
Light up |
,Press and hold the shutter button halfway down.
The beep sounds but the image is not yet recorded. When the AE/AF lock indicator changes from flashing to steadily lit, the camera is ready for shooting.
(The LCD screen may be frozen for a split second depending on the subject.)
The flash automatically pops up and strobes when the surroundings are dark.
•If you release the shutter button, shooting will be canceled.
•When the camera does not beep, the AF adjustment is not complete. You can continue to shoot, but the AF is not set properly (except in Continuous AF, page 47).
60min | VGA | 101 |
95
S AF
4
,Press the shutter button fully down.
The shutter sounds. The image will be recorded in the “Memory Stick.” When the recording lamp (page 9) goes out, you can shoot the next image.
•The frame indicated on the LCD screen shows the focus adjustment range (AF range finder, page 46).
•When operating the camera using a battery pack, if you do not operate the camera for a while during recording or playback, the camera turns off automatically to prevent wearing down the battery (page 14).
When shooting still images with your camera, you can choose from the following shooting methods.
(Auto adjustment mode)
The focus, exposure and white balance are automatically adjusted to allow easy shooting. The image quality is set to [Fine] (page 41).
P (Program auto shooting)
You can set the desired shooting functions using menus (pages 39 and 111). In addition, you can change the combination of the F value and the shutter speed (Program Shift, see page 43).
S (Shutter speed priority)
You can set the desired shooting functions using menus (pages 39 and 111). In addition, you can select the shutter speed (page 44).
images still Shooting
21