Turning on/off your camera
How to use the control button
POWER button
POWER
POWER lamp
,Press POWER.
The POWER lamp (green) lights up and the power is on. When you turn on your camera for the first time, the Clock Set screen appears (page 15).
Turning off the power
Press POWER again. The POWER lamp goes out, and the camera turns off.
•Do not leave the camera with the lens portion extended for a long period of time with the battery pack or the AC Adaptor removed, as this may cause a malfunction.
•If you turn on the power when the mode dial is
set to , P, S, A, M, SCN or , the lens portion moves. Do not touch the lens portion
while it is operating.
If you do not operate the camera for a while* during shooting or viewing or when performing SET UP, the camera turns off automatically to prevent wearing down the battery. The auto
•When viewing movies
•When playing back a slide show
•When a connector is plugged into the
(USB) jack or the A/V OUT (MONO) jack.
*When [Power Save] is set to [On]: approximately 90 seconds When [Power Save] is set to [Off]: approximately three minutes
Spot
Center
Multi
| Metering Mode | WB | ISO |
| Mode |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| FINE |
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
| Fine |
|
|
| |
|
|
|
| Standard |
|
|
| |
|
| WB | ISO | P.Quality | Mode |
| ||
|
|
|
|
|
|
|
|
|
To change the current settings of the camera, bring up the menu or the SET UP screen (page 39), and use the control button to make the changes.
For each item, press v/V/b/B to select the desired value, then press the center z or v/V/b/B to make the setting.
14