Playback and Recording 2 Chapter
If the following indicators light when a cassette is loaded
Indicator | It means: |
Cassette memory indicator | The loaded cassette contains a cassette memory. |
|
|
CL indicator | There is ClipLink log data stored in the cassette |
| memory on the loaded cassette. |
| Caution |
|
| With such a cassette, carrying out recording destroys | |
| the ClipLink log data. | |
|
| |
NO EDIT indicator | The recording format of the tape is “DV,” or a | |
| DVCPRO tape is inserted. | |
| Replace the tape with one that has been recorded in | |
| DVCAM format. |
| During editing operation |
| The audio recording mode selected on this unit does |
| not coincide with that of the tape. |
| In this case, set the unit for the same audio recording |
| mode as with the tape. |
| However, If your current purpose is recording only, |
| you can use the tape as it is. |
| For more details, see “Troubleshooting” on page 96. |
|
|
To perform the following operations | |
|
|
Operation | Do this: |
|
|
Stop recording. | Press the STOP button. |
| The unit enters stop mode, and will automatically |
| switch to standby off mode after the time period set |
| with the STOP TIMER menu item (see page 63) for |
| tape protection. |
|
|
Remove the cassette. | Press the EJECT button. |
| After a few seconds, the tape is unwound from the |
| head drum and the cassette is automatically ejected. |
| If a CNT value is shown on the time counter display |
| (the time data type indicator “COUNTER” is lit), the |
| CNT value is reset. |
|
|
Inhibit the unit from | Set the CHARA. DISPLAY menu item (see page 60) |
outputting text information | to OFF. |
(time data, operation mode |
|
indications, etc.) to the |
|
video monitor. |
|
|
|
Change the time period | Change the setting of the STOP TIMER menu item |
before the unit switches | (see page 63). |
from stop mode to standby |
|
off mode. |
|
|
|
32 Recording