Sony DSR-1500, DSR-1500P Video/audio signal connections

Video/audio signal connections

The following shows an example of video/audio signal connections in an A/B roll editing system.

In this example, analog component signals are used as the video signals and XLR 3-pin connectors are used as audio input/output connectors.

VIDEO IN				1		VIDEO INPUTS
		AUDIO IN			DFS-500/500P DME Switcher COMPONENT 2
		2/4
		1/3
					PGM OUT
		3	3	COMPONENT 1
DSR-1500/1500P						1 VIDEO INPUTS
(recorder)						COMPONENT 1
	CH-1 OUT	CH-2 OUT			DSR-1500/1500P	2
	DPS-D7 or other delay unit				(player 1)	VIDEO OUT
	3 CH-1 IN	CH-2 IN
		3
LINE OUT 2	LINE OUT 1

MXP-290	MIC/LINE 4 3 2 1		AUDIO OUT
		3	1/3	2/4
Audio Mixer	IN	3
		3
		3	COMPONENT 1
			OUTPUT
A 12-pin/3-BNC cross cable
(not supplied; consult your
Sony dealer about this cable.)
B 12-pin dubbing cable
(not supplied)
C Cable with XLR			AUDIO OUTPUT		CH-2
connectors (not supplied)			UVW-1600/1600P (player 2)	CH-1

and Connections 5 Chapter

Settings on the DSR-1500/1500P (recorder)

Switch/menu item	Setting
LOCAL/REMOTE switch	LOCAL
CH1 IN LEVEL and CH2 IN	Normally + 4 dBm
LEVEL menu items (see page
66)

For details of the video/audio input and audio mode settings, see “Settings for Recording” on page 27.

Settings on the DSR-1500/1500P (player)

Switch/menu item	Setting
LOCAL/REMOTE switch	LOCAL
OUTPUT LEVEL menu item	Normally + 4 dBm
(see page 66)
VIDEO OUTPUT menu item	Y− R, B
(see page 67)	(Y− R,B indicator lights.)
AUDIO OUTPUT menu item	1/2 CH or 3/4 CH
(see page 67)	(CH 1/2 or CH 3/4 indicator
	lights.)

Settings

Connections for an A/B Roll Editing System 87